Sunflex Tile Adhesive
Product Description
Sunflex Tile adhesive is ready-mixed and specially formulated from OPC, selected fine sand, and additives to improve its essential properties for laying tiles.
Advantage
• Plastered wall
• Bathrooms
• Swimming pool
• Kitchen Wash area
Application
• Spread the adhesive to a required bed thickness and comb with notched trowel.
• Then start placing the tiles on the surface within 15 to 20 min.
• Press the tiles firmly into position with a slight twisting action.
• Clean off surplus adhesive from the tile face and between joints.
• Joint filler Sunflex Tile Grout apply after 24 hours.
Mixing
• Mix 3 parts Sunflex Tile Grout and 1 part of water by volume to stiff consistency.
• Leave for 5 minute and remix.
• Use within 45 minutes.
Direction for use
The surface should be sound and thoroughly cleaned.
Coverage
App. 5 S.qm per 20 kg bag at 3 mm bedding thickness.